unable to delete a file

[n o s p a m p l e a s e]

I have a code that looks as follows:

---------------mytest.m--------------
clear all;

delete report.txt

fid = fopen('report.txt','a');
fprintf(fid, '\n %7d',refBus);
fclose(fid);
----------------------------------------

In the above code deletion of report.txt is not carried out. I get the
warning below.

Warning: File not found or permission denied

Even manually I cannot delete this file unless I close Matlab. What
can I do to delete this file without closing Matlab?

NSP

[someone]

n o s p a m p l e a s e <***@alum.com> wrote in
message <77024167-c932-4c22-8180-

Post by n o s p a m p l e a s e
---------------mytest.m--------------
clear all;
delete report.txt
fid = fopen('report.txt','a');
fprintf(fid, '\n %7d',refBus);
fclose(fid);
----------------------------------------
In the above code deletion of report.txt is not carried

out. I get the

Post by n o s p a m p l e a s e
warning below.
Warning: File not found or permission denied
Even manually I cannot delete this file unless I close

Matlab. What

Post by n o s p a m p l e a s e
can I do to delete this file without closing Matlab?
NSP

% The delete command works for me

% Why not just use the w option instead?

---------------mytest.m--------------
clear all;


fid = fopen('report.txt','w');
fprintf(fid, '\n %7d',refBus);
fclose(fid);
----------------------------------------

[Walter Roberson]

Post by n o s p a m p l e a s e
---------------mytest.m--------------
clear all;
delete report.txt
fid = fopen('report.txt','a');
fprintf(fid, '\n %7d',refBus);
fclose(fid);
----------------------------------------
In the above code deletion of report.txt is not carried out. I get the
warning below.
Warning: File not found or permission denied

You would get that if the file is already open within Matlab (or
within any other program.) Windows does not allow files to be deleted
if a process has them open.

[Steven Lord]

In article

Post by n o s p a m p l e a s e
---------------mytest.m--------------
clear all;
delete report.txt
fid = fopen('report.txt','a');
fprintf(fid, '\n %7d',refBus);
fclose(fid);
----------------------------------------
In the above code deletion of report.txt is not carried out. I get the
warning below.
Warning: File not found or permission denied

You would get that if the file is already open within Matlab (or
within any other program.) Windows does not allow files to be deleted
if a process has them open.

To expand on Walter's diagnosis, if your code errored at some point after
you FOPENed the file but before you FCLOSEd it (say as you were working on
creating your code), it would still be open. Use FOPEN with the 'all' flag
to determine if this is the case and use FCLOSE on the obtained fids if it
is.

[David]

Post by Steven Lord

In article

Post by n o s p a m p l e a s e
---------------mytest.m--------------
clear all;
delete report.txt
fid = fopen('report.txt','a');
fprintf(fid, '\n %7d',refBus);
fclose(fid);
----------------------------------------
In the above code deletion of report.txt is not carried out. I get the
warning below.
Warning: File not found or permission denied

You would get that if the file is already open within Matlab (or
within any other program.) Windows does not allow files to be deleted
if a process has them open.

To expand on Walter's diagnosis, if your code errored at some point after
you FOPENed the file but before you FCLOSEd it (say as you were working on
creating your code), it would still be open. Use FOPEN with the 'all' flag
to determine if this is the case and use FCLOSE on the obtained fids if it
is.
--
Steve Lord

I have the same problem. I tried your solution and still could not delete the file in windows. I get an error message in windows 7 that says:
"The action cannot be completed because the file is open in JxBrowser Chromium Native Process
Close the file and try again".

[Colin Edgar]

Post by David

Post by Steven Lord

In article

Post by n o s p a m p l e a s e
---------------mytest.m--------------
clear all;
delete report.txt
fid = fopen('report.txt','a');
fprintf(fid, '\n %7d',refBus);
fclose(fid);
----------------------------------------
In the above code deletion of report.txt is not carried out. I get the
warning below.
Warning: File not found or permission denied

You would get that if the file is already open within Matlab (or
within any other program.) Windows does not allow files to be deleted
if a process has them open.

To expand on Walter's diagnosis, if your code errored at some point after
you FOPENed the file but before you FCLOSEd it (say as you were working on
creating your code), it would still be open. Use FOPEN with the 'all' flag
to determine if this is the case and use FCLOSE on the obtained fids if it
is.
--
Steve Lord

"The action cannot be completed because the file is open in JxBrowser Chromium Native Process
Close the file and try again"

I too have the same issue. I have fclose() in use in script. An inquiry of fopen('all') returns []. In Win7 get error of "The action cannot be completed because the file is open in JxBrowser Chromium Native Process.Close the file and try again"

[Allen]

I also have this problem in Windows 7 and MATLAB R2016a after getting an error in my script. fopen all results in []; I have tried fclose all; and I still get the same error message - "Action can't be completed because the file is open in JxBrowser Chromium Native Process". There is clearly a problem here. Has anyone been able to solve it other than by completely shutting down Matlab?

Post by Colin Edgar

Post by David

Post by Steven Lord
To expand on Walter's diagnosis, if your code errored at some point after
you FOPENed the file but before you FCLOSEd it (say as you were working on
creating your code), it would still be open. Use FOPEN with the 'all' flag
to determine if this is the case and use FCLOSE on the obtained fids if it
is.
--
Steve Lord

"The action cannot be completed because the file is open in JxBrowser Chromium Native Process
Close the file and try again"

I too have the same issue. I have fclose() in use in script. An inquiry of fopen('all') returns []. In Win7 get error of "The action cannot be completed because the file is open in JxBrowser Chromium Native Process.Close the file and try again"

[Igor]

Post by Allen
I also have this problem in Windows 7 and MATLAB R2016a after getting an error in my script. fopen all results in []; I have tried fclose all; and I still get the same error message - "Action can't be completed because the file is open in JxBrowser Chromium Native Process". There is clearly a problem here. Has anyone been able to solve it other than by completely shutting down Matlab?

Post by Colin Edgar

Post by David

Post by Steven Lord
To expand on Walter's diagnosis, if your code errored at some point after
you FOPENed the file but before you FCLOSEd it (say as you were working on
creating your code), it would still be open. Use FOPEN with the 'all' flag
to determine if this is the case and use FCLOSE on the obtained fids if it
is.
--
Steve Lord

"The action cannot be completed because the file is open in JxBrowser Chromium Native Process
Close the file and try again"

I too have the same issue. I have fclose() in use in script. An inquiry of fopen('all') returns []. In Win7 get error of "The action cannot be completed because the file is open in JxBrowser Chromium Native Process.Close the file and try again"

Me as well, Matlab R2016b. But the file was created with diary() function, not fopen().
I'm still unable to produce a stable reproduction recipe to report to Mathworks. But it would be nice if anyone would find it. I suspect, that this might be associated with parallel processing toolbox, and/or with opening multiple Matlab instances.

[Joe]

Post by Igor
Me as well, Matlab R2016b. But the file was created with diary() function, not fopen().
I'm still unable to produce a stable reproduction recipe to report to Mathworks. But it would be nice if anyone would find it. I suspect, that this might be associated with parallel processing toolbox, and/or with opening multiple Matlab instances.

Me too! I am using the parallel tool box to open multiple files. I've got multiple " fclose('all');" statements riddled throughout the code, but after the parfor loop ends, I cannot delete the files. Any updates anyone?

[Chetan]

This post might be inappropriate. Click to display it.

[Igor]

This post might be inappropriate. Click to display it.

[l***@gmail.com]

Post by Igor
Hi Chetan,

Post by Chetan

Post by n o s p a m p l e a s e
---------------mytest.m--------------
clear all;
delete report.txt
fid = fopen('report.txt','a');
fprintf(fid, '\n %7d',refBus);
fclose(fid);
----------------------------------------
In the above code deletion of report.txt is not carried out. I get the
warning below.
Warning: File not found or permission denied
Even manually I cannot delete this file unless I close Matlab. What
can I do to delete this file without closing Matlab?
NSP

If you have source control enabled then MATLAB won't allow you to delete the file.
Disable it at Home/preferences/General/Source control -> None

I have this same problem in Matlab R2018a and R2018b, but i can workaround it by shutting down the parallel pool before accessing the diary file (i actually move the file). This seems to always work for me....

[Kalkin Powale]

Post by l***@gmail.com

Post by Igor
Hi Chetan,

Post by Chetan

Post by n o s p a m p l e a s e
---------------mytest.m--------------
clear all;
delete report.txt
fid = fopen('report.txt','a');
fprintf(fid, '\n %7d',refBus);
fclose(fid);
----------------------------------------
In the above code deletion of report.txt is not carried out. I get the
warning below.
Warning: File not found or permission denied
Even manually I cannot delete this file unless I close Matlab. What
can I do to delete this file without closing Matlab?
NSP

If you have source control enabled then MATLAB won't allow you to delete the file.
Disable it at Home/preferences/General/Source control -> None

I have this same problem in Matlab R2018a and R2018b, but i can workaround it by shutting down the parallel pool before accessing the diary file (i actually move the file). This seems to always work for me....

For 2022b use: fclose('all') before calling delete function it works.

[Martin Lawrece]

Signal/ : [phone]
Text/ : [phone]
Telegram :[phone] or @fasthookup102
wanji.nicolas @ yandex.con

Dumps with Pin is a really great way to invest your money to make Great profits. , but to
start making great profits you must know how to use Dumps+Pin!
When you buy aDump with pin, each piece comes with the track2 and the Pin to that
specific Dump. So, when making card you only need to write the track 2
For example: 4147097698495167=180320115218492901, this is the track2 and this is all
you need in order to write dump on to card.
Majority of stores and ATM’s where dumps are used DO NOT NEED TRACK1... Dumps with
Pin can be used all over the World where Visa, Master, AMEX, Discover and maestro are
excepted. You can use dumps with pin at almost every ATM and Store. So, the best way to
make full use of dumps is to check the balance at ATM and you can know the balance of
each Account before going to make purchases.
Some customers struggle in being able to use 201 Chip dumps, but there are many ways to
By-Pass chip.
These methods for 201 use are, the best method is using cards with the chip malfunctioned.
This means that the card has a chip which is programmed to malfunction chip readers and
automatically lets you swipe your card to make purchase. This works very good on VeriFone
and Ingenico, which are the 2-main card and chips readers in majority of stores around the
Globe.
Another method to use 201 dumps in stores is to Insert a card with a fake chip (not
programmed chip) Insert 3 times and then this will malfunction chip reader for you to be
able to swipe your card. These 2 methods are the best way to bypass chip readers for you to
be able to swipe 201 dumps and again track1 is not needed to use any of the Dumps with
Pin.
If you know how to use the dumps with pin, you will be able to maximize Profits for a
longtime. In our shop, we also offer credit Dumps with Pin and there is 2 ways to use the
Credit dumps. You can withdrawal cash from the atm with credit card Dumps+Pin. When
withdrawing from Credit card you must select the credit card option on the ATM not
Checking or Savings like the Debit dumps+Pin. when you do this, you will be able to
withdrawal cash from the Credit Line of the Account. You can Keep withdrawing cash from ATM until the credit card has Reached its credit .
best cc sites for carding, carding cc buy, cc sites for carding, sites to buy cc for carding, cvv shop cheap, best dumps with pin shop, carding cvv shop, cheap cc shop, best cvv dumps shop

cc cloning, fresh dumps ccv, buy cc clone dumps, card cloned dumps, buy dumps cloned emv, dumps cloned ccv



Signal/ : [phone]
Text/ : [phone]
Telegram :[phone] or @fasthookup102
wanji.nicolas @ yandex.con

ATM WITHDRAW - CLONED CARDS & ONLINE PREPAID CVV CARDS WITH BALANCE (WORLDWIDE SHIPPING)


We obtain hacked credit cards data and then write this data to a plastic card, We provide complete info and pin code to a buyer and you can easily cashout the real money from any ATM around the world. You will get complete cloned card details along with the card. We provide 24 hours delivery within USA, Uk, Canada, Germany and Dubai etc. For All other countries shipping time will be different.

We also sell CVV prepaid cards that can be used online on any website.

Plastic Cloned Cards Price List :-

Low balance
$150 for balance $1.5k
$250 for balance $3k
$350 for balance $4K
$450 for balance $5k
$550 for balance $7k

High Balance

$1k for balance $15k
$2k for balance $30k
$3.5k for balance $50k
$5k for balance $ 70k

Delivery & Details :-

We obtain hacked credit cards data and then write this data to a plastic card, We provide complete info and pin code to a buyer and you can easily cashout the real money from any ATM around the world. You will get complete cloned card details along with the card. We provide 24 hours delivery within USA,Uk,Canada,Germany and Dubai etc. For All other countries shipping time will be different.

Prepaid Cards (Visa - Mastercard - American Express) :-

These cards are not associated with a bank account or person and are therefore considered the safest cards to use. These cards costs are a little more expensive than cloned cards because we've already clearing a clone card and transferring money to a prepaid card. With this card you can enjoy all the possibilities of use (shopping in stores and withdrawals) along with peace of mind.

Prepaid Card With 2500$ = 300$ Bitcoins

Prepaid Card With 3000$ = 400$ Bitcoins

Prepaid Card With 4000$ = 500$ Bitcoins

Prepaid Card With 7000$ = 650$ Bitcoins

Prepaid Card With 9000$ = 750$ Bitcoins

Is it Safe?

Yes, it’s absolutely safe if you do a little effort and don't let others around the ATM see how the card looks like.

All cards are safe for delivery and are not prohibited items. We make sure to send the cards in safe packages such as: greeting cards, magazines and more. In addition, our cards look exactly like a regular credit card with a high quality of printing and embossing. Even if the parcel is opened there is nothing to incriminate you.

When will you send my order after payment?

We will ship your order within 24 hours after payment.

Do you give the tracking number?

If you choose Express or Overnight delivery, we will send you the tracking number immediately after sending.

What is difference between a cloned card and prepaid card?

Cloned card is a card whose details have been copied using a dedicated device called “ATM Skimmer” or by hacking into credit card databases on the Internet. The card is associated with a person’s bank account.

Prepaid card is a card that can be used anywhere that accept a Visa, MasterCard or AMEX but the difference is that it is a card that is not associated with any bank account and does not have any identification information and therefore its use is completely anonymous.

Do you provide PIN numbers?

Yes. all cards have magnetic stripe & chip with 4 Digit PIN Code.

To what countries do you ship?

EU, US, ASIA, AFRICA - DEPENDING ON COUNTRY MOSTLY VIA DHL, USPS, ROYAL MAIL OR YOUR COUNTRIES NATIONAL POSTAL SERVICE with Tracking (Not always accurate or delayed updates)

EU COUNTRIES - ASK FIRST

USA 1-3 DAYS with MOSTLY WITH UPS OR DHL with Tracking

RUSSIA 6-9 DAYS with Tracking then passed to Russian National Postal Service for delivery to your address. (Tracking not always accurate as there is delay in update until received in Russia)

What countries can I use these cards?

Visa and MasterCard are international cards, and you can withdraw them at any ATM.

Can I use these Online buy things?

No they do not work online. Just to withdraw at ATM but I have another service where I sell prepaid cards for online buying just ask me.

Why don't you withdraw yourselves?

Of course, we withdraw for ourselves. But we cannot cash much money in one small city, because it is dangerous. It is also very dangerous to cooperate with agents in other cities, because they can be the police. It is easier and safer for us to deal with the sale. It's easy to withdraw small scale cash but when we keep doing it it becomes riskier as we have to prove where the money came from and it's very hard to launder cash into businesses. We need bitcoin directly so we can launder it into other businesses without banks, local jurisdictions asking us questions. We also believe in Bitcoin and hope to get rich with it. (Jokes) It works better if we sell to other people because they need few of them to pay off things.

Message us via private telegram, WA, email etc.



Signal/ : [phone]
Text/ : [phone]
Telegram :[phone] or @fasthookup102


===> Price for Dumps Track 1&2 With Pin ATM

** Usa :101

- Visa Classic, MasterCard Standart =45$

- Visa Gold|Platinum|Business, MasterCard Gold|Platinum = 50$

- American Express = $50 (Without SID)

- Discover = $50

** Canada: 101 201

- Visa Classic, MasterCard Standart = 45$

- Visa Gold|Platinum|Business, MasterCard Gold|Platinum = 50$

** EU, UK: 101 201

- Classic|Standart = 60$

- Gold|Platinum = 70$

- Business|Signature|Purchase|Corporate|World = 100$

** ASIA/AUSTRALIA/Exotic: 101 201 121

- MasterCard| Visa Classic = $50

- Visa Gold|Platinum|Corporate|Signature|Business = $70

** Other countries: 101 201

- MasterCard| Visa Classic = 50$

- Visa Gold|Platinum|Corporate|Signature|Business = 70$

USA Dumps Track1 + Track2 (no Pin)
101, 121 = $50 per 1
201, 221 = $40 per 1
USA Dumps Track1 + Track2 with Pin
101, 121 = $150 per 1
201, 221 = $100 per 1
UK Dumps Track1 + Track2 (no Pin)
101, 121 = $80 per 1
201, 221 = $64 per 1
UK Dumps Track1 + Track2 with Pin
101, 121 = $200 per 1
201, 221 = $160 per 1
Canada/Australia Dumps Track 1 + Track2 (no Pin)
101, 121 = $60 per 1
201, 221 = $48 per 1
Canada/Australia Dumps Track 1 + Track2 with Pin
101, 121 = $160 per 1
201,221 = $120 per 1
[13:43, 07/06/2023] OG: EU/Asia/South America/Africa Dumps Track1 + Track2 (no Pin)
101, 121 = $100 per 1
201, 221 = $80 per 1
EU/Asia/South America/Africa Dumps Track1 + Track2 with Pin
101, 121 = $240 per 1
201, 221 = $200 per 1



Signal/ : [phone]
Text/ : [phone]
Telegram :[phone] or @fasthookup102

price for Software EMV

SOFTWARE GOOD OMNIKEY, MCR 200, ACR 38, ACR 92, ACR 122, EMV 160, EMV 200

TEACH HOW USE SOFTWARE:EMV Reader Writer Software Is able To read write or duplicate Credit Or Debit Card's.

We are Glad to introduce to our costumers the new EMV Reader/Writer v8.6 which is more powerful then (EMV Reader Writer Software v8)

EMV Reader Writer Software v8.6 is the most powerful EMV Smart Card Reader/Writer Software in the world.

Development by EmvGlobalSolution Software Team,

EMV Reader Writer Software v8.6 Is able To Read/Write/Duplicate/Delete any EMV Protocol such as 201,206,226 or any EMV other Protocol,it will allow you to Read/Write/Duplicate/Erase SDA(Static Bin) / DDA (Dynamic Bin)

PRICE for Software is $300


Signal/ : [phone]
Text/ : [phone]
Telegram :[phone] or @fasthookup102